LP1020-24

High Perfection

LP1020-24

20 watt 24 volt constant voltage LED power supply

Description
The High Perfection Tech. LP1020-24 is a single output constant voltage LED driver / power supply. It has a 24Vdc constant voltage and a maximum output current of 830mA. The LP1020-24 has a maximum output of 20 watts. It can operate on an AC input voltage from 100 - 277V. The LP1020-24 is not dimmable. It is cULus and CE approved and is rated IP66 for dry and damp locations. It has a very compact footprint of 3.74 x 1.57 x 0.98 inches.
A constant voltage LED driver is a type of power supply that maintains a steady voltage output, typically 12V or 24V DC, regardless of the load connected to it. Unlike constant current drivers, which regulate the current, constant voltage drivers allow the current to vary depending on the requirements of the LEDs connected.
Constant voltage LED drivers are used in specific applications where LEDs are designed to operate at a fixed voltage. These LEDs usually have built-in current-limiting resistors or internal constant current drivers to regulate the current flow themselves.
Reasons to use constant voltage LED drivers or power supplies:
- Compatibility with certain LED types: Many LED strips, modules, and some types of signage are designed to be powered by a constant voltage source. These LEDs have internal circuitry to manage the current.
- Ease of installation: Constant voltage systems are generally simpler to wire, especially for longer runs of LED strips. You can connect LEDs in parallel, and each LED receives the same voltage.
- Flexibility in length: LED strips designed for constant voltage drivers can often be cut to the desired length without needing to adjust the driver, as long as the total current draw remains within the driver's capacity.
- Cost-effectiveness: Constant voltage drivers are often less expensive than constant current drivers, especially for larger-scale applications.
However, it's crucial to use constant voltage drivers only with LEDs specifically designed for them. Using a constant voltage driver with LEDs intended for constant current can lead to overcurrent and damage the LEDs.
In summary, constant voltage LED drivers are used when the LEDs themselves regulate their current and require a stable voltage supply. They offer simplicity, flexibility, and cost-effectiveness for specific types of LED lighting applications like LED strips and certain signage.
  • Mfr. High Perfection Tech.
  • Model# 20-3871 LP1020-24
  • Constant voltage 24Vdc
  • 20w maximum
  • Single output
  • Output current max. 830mA
  • Input voltage 100 – 277Vac
  • Not dimmable
  • IP66 (dry and damp locations)
  • 3.74 x 1.57 x 0.98
Specifications
Specification
Status
Available
Case Qty
1
Driver Type
Constant Voltage
Number of Outputs
1
Voltage (Vin)
120-277
Voltage - Input (min)
100
Voltage - Input (max)
304
Output Volts (Vo)
24
Output Current (Io)
830
Wattage (Po)
20
Dimming
No
IP Rating
IP66
Class 2
Yes
Tc
185'F
Mounting Type
Mounting Feet
Termination
Wire Leads
Dimensions(L/W/H)
3.74 x 1.57 x 0.98
Weight
0.58
Operating Temp. (min)
-22'F
Country of Origin
China
Certifications / Approvals
cULus, CE
UL File No
E249377
Warranty
3 Year Manufacturer
General
Brand
High Perfection
Item #
74804
Category
Constant Voltage
You might be interested in these items
Customer Reviews
Share your thoughts with other customers
Login to leave a review
Top Reviews
Great item!
by J N on September 13, 2019
 
 
 
 
 

Item was great, did exactly what it was supposed to do. Replaced a bad unit in my fixture, easy and quick to install!

3 of 3 found this helpful.Was this review helpful to you? yes no
Impressive!
by Accounts P on September 19, 2019
 
 
 
 
 

Would highly recommend this company! Received my order in 2 days and pricing was very responsible. Thanks!

1 of 1 found this helpful.Was this review helpful to you? yes no
Return Policy

H&M Returns Policy


How to set up a Return

1. Email [email protected] with a request for return.
2. Make sure to include your Invoice Number or Order ID in the email.
3. If your order was shipped in the last 30 days, our Customer Service Team will review your request.
4. If approved you will receive an RMA # via email.
5. Make sure to securely package the item(s), ship back to the address stated in the email approval.


Requirements / Restrictions
 


  • All returns must be started within 30 days of the order's ship date.
  • All returns must include an authorized RMA number on the outside of the package.
  • Any item listed as discontinued or being phased out is non-returnable.
  • All items marked as "Quoted" or "Special Order item" are non-cancelable and non-returnable.
  • The costs of returning non-defective products to us are the responsibility of the customer.
  • In order to receive a store credit or refund, products must be returned in working order and in their original, undamaged packaging.
  • All orders shipped outside of the USA/Canada are non-returnable.
  • We will not be responsible for covering defective products for orders shipped outside of the USA.
  • We do not offer expressed or implied a warranty on any items. Any issue with a warranty claim must be handled directly with the manufacturer.


Restock Fee


  • If a product is returned and is in full operating order, a restocking fee of 25% will automatically be deducted from any refundable amount.
  • If an order is returned without authorization or an RMA #, a 40% restocking fee will be deducted from any refundable amount.


Why is there a Restock Fee?


  • When we process a return for non-defective product, we have significant labor costs to process the inbound shipment and to test that product is valid for resale. And if/when we return special order products to the manufacturer, we are assessed restock fee ourselves.
  • Our restock fee is standard for the industry and less than what the manufacturers charge us.


Damage / Missing Shipment or Items
 


  • Customer is responsible to open and inspect your shipment within 48 hours of receipt.
  • All shipment issues for damage, shortage or wrong items must be reported within 48 hours of delivery.
  • Any missing shipments must be reported within 14 days of the order ship date for full reimbursement.


 

 

Questions & Answers
Be first to ask a question

We specialize in providing cost effective replacement ballasts along with a large assortment of lampholders and lampholder accessories. We also pride ourselves on same day shipping! All orders received before 1pm PST will ship same day, providing all items are in stock and it's not a special order.

SIGN UP FOR OUR NEWSLETTER
and receive special deals and discounts.

ABOUT H&M

CONTACTS

H&M Distributors, Inc.
141 Cassia Way,Ste. A
Henderson, NV 89014

International: +1-702-294-8944
Fax: (702) 294-8946

Email: [email protected]

Open: 7:00am to 3:00pm PST, M-F