Sensata RP-5A 120v rated up to 480v thermal protector Primary Usage is 120/277 but is rated up to 480VAC, Automatic Resetting Device causes fixture light to blink in fault condition

Sensata RP-4A 277v low sensitivity 3 wire thermal protector Automatic resetting device causes fixture light to blink in fault condition. Sensitivity to thermal conditions 50/60 Hz

Leviton Y45K4-120-347V 120v, 347v 8.2k 145'C thermal protector Snaps into 1/2 knockout, 8.2k 120/347v 145'c thermal protector with 6" leads

Leviton 9454-D35 120v 7.2k 135'C thermal protector Snaps into 1/2 knockout, 7.2k 120v 135'c thermal protector with 6" leads

Sensata RP-1B 120v low sensitivity dedicated voltage 3 wire thermal protector 3 wire RP for Dedicated Voltage The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with an extra six inch piece of wire of the same

The Sensata RP-12A 277v high sensitivity dedicated voltage 3 wire thermal protector. The 3 wire Sensata RP-12A is for277v  Dedicated Voltage The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with

Sensata RP-13A 120v high sensitivity dedicated voltage 3 wire thermal protector 3 wire RP for Dedicated Voltage The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with an extra six inch piece of wire of the sam

Sensata RP-14A 240v high sensitivity dedicated voltage 3 wire thermal protector 3 wire RP for Dedicated Voltage The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with an extra six inch piece of wire of the sam

Sensata RP-7A 208v low sensitivity 4wire thermal protector for multi-tap ballasts The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with all common wires The yellow wire of the RP-7A is connected to the 208 Vo

Sensata RP-8A 120v low sensitivity dedicated voltage 3 wire thermal protector 3 wire RP for Dedicated Voltage The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with an extra six inch piece of wire of the same

The Sensata Dominican RP10A is a thermal protector for lighting fixtures. It has a dedicated voltage 220Vac. The Sensata Dominican RP10A has thre leads color coded for proper installation. When the temperature of the fixture is exceded it will cause the light to blink. It is auto resetting for when

Sensata RP-11A 120v low sensitivity 4wire thermal protector for multi-tap ballasts The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with all common wires The red wire of the RP-11A is connected to the 120 Vol

Sensata RP-17A 220V high sensitivity dedicated voltage 3 wire thermal protector 3 wire RP for Dedicated Voltage The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with an extra six inch piece of wire of the sam

Sensata RP-18A 277v high sensitivity 4wire thermal protector for multi-tap ballasts The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with all common wires The orange wire of the RP-18A is connected to the 277

Sensata RP-6A 240v low sensitivity dedicated voltage 3 wire thermal protector 3 wire RP for Dedicated Voltage The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with an extra six inch piece of wire of the same

Sensata RP-9A 12V low sensitivity dedicated voltage 3 wire thermal protector 3 wire RP for Dedicated Voltage The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with an extra six inch piece of wire of the same c

Sensata RP-15A 208v high sensitivity 4wire thermal protector for multi-tap ballasts The black lead wire is always connected to the input live wire The white wire is the common which is permanently connected at the factory with all common wires The yellow wire of the RP-15A is connected to the 208

For one 70w ceramic Metal Halide lamp with thermal protecto