End mullion lens clip

Center Mullion Lens ...

Center mullion clip beginning 1994

Pair of mounting clips for Hera T4 Slimlite XL series fixtures

1 Jesco Fixture Mounting ...

Mounting clips for YGLLD fixtures

Jesco under-cabinet fixture vertical/horizontal mounting clip

E26/E27 medium base lampholder w/ spring clip mounting and screw terminals

E26/E27 medium base socket with spring clip mounting and 18 leads

E26/E27 medium base lamp holder with spring clip mounting and 8 leads

E26/E27 medium socket with spring clip mounting and set screw connections

Unshunted, V lock, T8 lamp holder w/spring clip mounting & 9 inch leads Link to T8, T10,

Unshunted, straight insertion lamp holder with rear mounting clips

GU24 Base CFL lamp holder with spring clip mounting and 24 inch leads

The LH0155 DM BLS 36-05 is a 2G11 vertical support clip that fits in a round hole. The LH0155 DM BLS 36-05 is made of polycarbonate and is designed for long twin tube-PLL CFL fluorescent and LED lamps. It is similar or equal to the BJB 26.726.821.85, DM BLS-36.05, 59014, HH Fluorescen

The LH0726 BJB 26.726.821 is a 2G11 vertical support clip that fits in a round hole. It has a round mounting foot that fits in a 5.5mm hole and is designed for long twin tube-PLL CFL fluorescent and LED lamps. It is similar or equal to the BJB 26.726.821.85, DM BLS-36.05, 59014, HH F

E26/E27 med base incan. Lampholder w/spring clip mounting & screw terminals

E26/E27 4kv pulse rated med base HID socket w/ spring clip mntng and 9 inch leads

E26/E27 medium base lampholder with spring clip mounting & 18 leads

The LH0356 is a 2G11 LED or fluorescent lamp support clip. It supports the lamp in a horizontal position and reduces the strain on the socket. The LH0356 is for all 2G11 lamps such as biax, long twin tube and PLL LED or fluorescent lamps. It has a rectangular mounting foot that fits in an

LH0530 HH 125-5 Starter base socket with spring clip mounting

The LH0596 Golo GE-6002U is an E26 / E27 medium base lampholder / socket for standard medium base LED or incandescent bulbs. It made of phenolic plastic and has a spring clip for mounting. The LH0596 Golo GE-6002U has 9 inch leads and wire channels. The LH0596 Golo GE-6002U is similar or equal

The Leviton 8880 (LH0001) is a lampholder that is designed for incandescent lamps. It is a one-piece, keyless, front mount lampholder with a medium base. It is also a single circuit, back wired lampholder that is rated for 660 W and 250 VAC. The Leviton 8880 is an E26/E27 Medium base keyless ...

E26/E27 medium base lamp holder with spring clip mounting and 18 leads

Hill Phoenix P109002F rotation ring clip for Clearvoyant 4 LED fixtures

E12 candelabra base socket with spring clips for mounting and 5 leads

E26/E27 medium base lamp holder with spring clip mounting and 36 inch leads

G4, G5.3, G6.35 bipin halogen lamp holder with 1/8 IPS hickey and locking clip

E26/E27 4kv pulse rated HID socket w/ spring clip mounting & screw terminals

GU24 Base CFL lamp holder with spring clip mounting and 24 inch leads

Left hand (power end) shelf clip for LED light strip

Right hand (non-power end) shelf clip for LED strip

The Hera Lighting STICK3/MC/45/SET is a pair of mounting clips for Hera STICK3 LED fixtures. They set the fixture at a 45' angle and have the screws attached.

The Hera Lighting STICK3/MC/MAGNET/H is a pair of magnetic mounting clips for Hera STICK3 LED linear fixtures. No need for screws.

The Hera Lighting STICK3/MC/SET/H is a pair of mounting clips for Hera STICK3 LED linear fixtures. Screws are included.

plastic latch for enclosed and gasketed ...

2G11 base vertical lamp support with push fit circular hole ...

2G11 base lamp metal vertical lamp support with sigle hole mounting Link to 2G11, Long twin tube, Biax, PLL lamps that fit this support ...

2G11 base horizontal lamp support with push fit circular hole ...

The LH0279 Vossloh Schwabe 108878 is vertical lamp support for 2G11 base Long Twin Tube, PLL or Biax LED or fluorescent lamps. It is designed to fit into a 5.5mm hole. The LH0279 allows the lamp to be mounted vertically instead of horizontally. 5.2mm lamp axis. This support is similar or equal to ...

The LH0241 is a "U" lamp support clip or lampholder. It is designed to secure the lamp in position with the lampholders. The LH0241 can be used with T8 or T12 LED or fluorescent "U" bend and linear lamps for additional support. It has a center hole for mounting and insulated arms to

Mounting kit for Hill Phoenix LED Canopy lights. Includes two screws PB3*10, one DC connector (cornice), four screws PM2.5*10, one mounting (cornice), one T-clip

Hill Phoenix 12 inch LEd cord ...

Hill Phoenix Clearvoyant 4 48" high output, 3500K, LED canopy ...

T8 Support ...

E26/E27 medium base socket with spring clip mounting and 18 leads

E26 medium base socket with spring clip mounting and twist lock connection

E26/E27 medium base socket with spring clip mounting and screw terminals